Init guide
INDEX
FRONT DIAGRAM
|
DESCRIPTION |
| 1. Camera |
| 2. Microphones |
| 3. Change work profile |
| 4. On / off Button |
| 5. Keyboard |
| 6. On / Off Touchpad |
| 7. Touchpad |
SIDE DIAGRAMS
|
DESCRIPTION |
|
| 8. SD reader |
14. Audio jack |
| 9. USB 3.2 |
15. Mini DisplayPort |
| 10. USB 3.2 | 16. USB-C |
| 11. Kensington Lock |
17. HDMI |
| 12. USB 2.0 |
18. RJ45 |
| 13. Microphone |
19. DC-in |
REAR DIAGRAM
|
DESCRIPTION |
| 20. Ventilation |
| 21. Speakers |
PACKAGE CONTENT
FIRTS STEPS
To turn on the computer, hold down the power button for 1 second and release it, located on the upper right side.
If the distribution you
have chosen allows OEM installation (no user creation), it is time for
you to create your username and password and set up your network.
In case the chosen distribution does not allow OEM installation, the user and password is slimbook, in addition, if the root user is enabled or has requested disk encryption, his password is also slimbook, change it to a secure one!
FUNCTIONS KEYS
| DESCRIPTION | |
| Fn + F1- Enable / Disable touchpad | Fn + F7 - Switch Display Output |
| Fn + F2 - On / Off Screen | Fn + F8 - Decrease Brightness |
| Fn + F3 - Silent | Fn + F9 - Increase Brightness |
| Fn + F4 | Fn + F10 - Enable / Disable camera |
| Fn + F5 - Volume down | Fn + F11 - Enable / Disable Flight Mode |
| Fn + F6 - Volume up | Fn + F12 - Sleep |
To access the "Boot menu": Press the F7 key repeatedly after turning on the computer.
BATTERY
Try not to discharge the battery from 100% to 0% directly; instead, aim
to use the battery within an intermediate range between both extremes,
as it experiences less stress (20-80%). Try to keep it above 20%.It is also recommended to connect the device to power only when charging and not to leave it always connected.
Avoid constantly connecting and disconnecting the adapter every few minutes. Once the charging cycle is established, it's best not to interrupt it, thereby reducing battery degradation.
For more information on this topic, please check our blog: Tips: Battery Care
| STATUS INDICATOR | CHARGE STATUS |
| White solid LED | Battery charging |
| White blinking LED | Low battery |
| LED off | Fully charged |
MOTHERBOARD SECURITY
By entering the BIOS with F2, you can disable components to improve your privacy, this will prevent them from being accessed by the operating system. The components are: the webcam, the microphone, WiFi and the bluetooth.
MODOS DE TRABAJO
RECOMMENDATIONS
It's recommended not to use your device when temperature is over 35 degrees.
Try to keep vent holes clean and unobstructed.
Use appropriated protection to carry the computer, avoid crushings and try not to place objects such as the charger over or under it.
It is recommended
Slimbook Service installed if you use Linux, we have a notifications sections in which we publish new BIOS updates and news relevant to your model.
MAINTENANCE
Thermal paste manufacturers only give 1 year warranty, so you should
change it approximately every 1-2 years for proper maintenance.
If you need help during the process, you can follow this tutorial: How to replace thermal paste
To open your laptop, you can follow this link where we have some step by step video tutorials on how to do it.
**You do not lose the warranty for opening the laptop, but you do lose it if you cause any damage because of it. Therefore, although you can open the laptop, do not open it if it is not necessary and do not do it during the first months of use, to test that everything works properly in a while**
If you have little experience and you want one of our technicians to
perform the maintenance, you can contact us through the contact form at support contact form to get a budget.
WHAT DO I DO WHEN MY LAPTOP HAS A PROBLEM?
These tutorials may be helpful in identifying the problem.
If your Slimbook needs to be serviced by a technician in or out of warranty, open a ticket at: Support