Init guide

    INDEX


        Odoo • Imagen y texto

         

        FRONT DIAGRAM
        1. Camera
        2. Noise-canceling microphones
        3. LCD Screen 16:10
        4. Power On/Off Button
        5. Caps Lock LED
        6. Speakers
        7. Touchpad

        Odoo • Imagen y texto Odoo • Imagen y texto

        SIDE DIAGRAMS
        8.  Headset interface
        9. USB-A 3.2 Gen1 (5Gbps)
        10. DC-in
        11. HDMI
        12. USB-C 3.2 Gen2 (10Gbps) + PD (100W)
        Odoo • Imagen y texto
        REAR DIAGRAM
        13. Ventilation holes
        14. Speakers

        PACKAGE CONTENT


        LAPTOP

        POWER SUPPLY & POWER CORD

        FIRST STEPS

        To turn on the computer, hold down the power button for 1 second and release it, located on the upper right side.

        If the distribution you have chosen allows OEM installation (no user creation), it is time for you to create your username and password and set up your network.
        In case the chosen distribution does not allow OEM installation, the user and password is slimbook, in addition, if the root user is enabled or has requested disk encryption, his password is also slimbook, change it to a secure one!

        FUNCTIONS KEYS

        DESCRIPTION
        Fn + F1 - Sleep ModeFn + F7 - Decrease Volume
        Fn + F2 - Decrease Brightness 
        Fn + F8 - Increase Volume
        Fn + F3 - Increase Brightness
        Fn + F9 - Toggle Keyboard Backlight 
        Fn + F4 - Switch Display Output
        Fn + F10 - Energy Saving Mode
        Fn + F5 - Disable Touchpad
        Fn + F11 - Balanced Mode
        Fn + F6 - Mute Sound
        Fn + F12 - Performance Mode
        To access the BIOS/UEFI: Press the F2 key repeatedly after turning on the computer.
        To access the "Boot menu":
        Press the F7 key repeatedly after turning on the computer.

        BATTERY

        Try not to discharge the battery from 100% to 0% directly; instead, aim to use the battery within an intermediate range between both extremes, as it experiences less stress (20-80%). Try to keep it above 20%.

        It is also recommended to connect the device to power only when charging and not to leave it always connected.

        Avoid constantly connecting and disconnecting the adapter every few minutes. Once the charging cycle is established, it's best not to interrupt it, thereby reducing battery degradation.
        For more information on this topic, please check our blog:
        Tips: Battery Care
        Discover the new SmartBattery intelligent battery system:
        SmartBattery: What is it and how does it work?
        STATUS INDICATOR
        CHARGE STATUS
        LED * Battery charging 
        LED * Low battery 
        LED * LED off     Fully charged 

        WORK PROFILE

        The works profiles in this model can be changed with the key combinations Fn+10 (Energy Saver), Fn+11 (Balanced), Fn+12 (Performance). These modify the TDP values and the fan speed table to make it quieter or more powerful.
        If you want these combinations to work and the system to notify you of the change with a pop-up message, you must have Slimbook Service  installed.
        DESCRIPTION
        ENERGY SAVER (Fn+10)
        Reduced TDP for increased battery level and quiet profile
        BALANCED (Fn+11) Recommended mode for power and battery balance
        PERFORMANCE (Fn+12) Increases TDP for heavy-duty tasks, but reduces battery level
         
        TDP VALUES WITH ORIGINAL 100W CHARGER - PL1, PL2, PL4 *
        ENERGY SAVER
        En desarrollo
        BALANCED En desarrollo
        PERFORMANCEEn desarrollo
         

        PL1 (STAPM) – Sustained Thermal and Power Management
        PL2 (sPPT) – Short-term Package Power Tracking
        PL4 (fPPT) – Fast Package Power Tracking

        TDP VALUES IN BATTERY MODE - PL1, PL2, PL4 *
        ENERGY SAVER
        En desarrollo
        BALANCED En desarrollo
        PERFORMANCEEn desarrollo
         

        RECOMMENDATIONS


        Don't use your laptop when the ambient temperature exceeds 35°C.

        Try to keep vent holes clean and unobstructed.

        Use appropiated protection to carry the computer, avoid crushings and try not to place objects such as the charger over or under it. 

        It is recommended to have
        Slimbook Service  installed if yo use Linux, we hace a notifications section in wich we publish new BIOS updates and news relevant to your model.

        MAINTENANCE


        Thermal paste manufacturers only give 1 year warranty, so you should change it approximately every 1-2 years for proper maintenance.
        If you need help during the process, you can follow this tutorial:
        How to replace thermal paste

        To open your laptop, you can follow this
        link where we have some step by step video tutorials on how to do it.

        **You do not lose the warranty for opening the laptop, but you do lose it if you cause any damage because of it. Therefore, although you can open the laptop, do not open it if it is not necessary and do not do it during the first months of use, to test that everything works properly in a while**.

        If you have little experience and you want one of our technicians to perform the maintenance, you can contact us through the contact form at support contact form to get a budget.


        WHAT DO I DO WHEN MY LAPTOP HAS A PROBLEM?

        We have available in our Blogs section, tutorials like these: My Slimbook does not turn on, what can i do?
        or Rule out RAM failure with Memtest86+
        These tutorials may be helpful in identifying the problem.

        If your Slimbook needs to be serviced by a technician in or out of warranty, open a ticket at:
        Support
        TUTORIALS
        DRIVERS & DOWNLOADS
        REPLACEMENTS & PARTS
        PRODUCT PAGE