Init guide

MOTHERBOARD SECURITY

---

To access BIOS press DEL or SUPR at boot. Try to avoid wireless keyboards, it is better to connect a USB keyboard.

Avoid changing unknown parameters, this could cause boot to fail.

To enter boot menu, press F7 at boot. Your USB boot device must be UEFI/Secureboot o Legacy depending on your BIOS configuration. If not, it won't appear on boot devices list.

RECOMMENDATIONS

---

Try to keep vent holes clean and unobstructed.

It is recommendable to clean the vent holes with a brush or similar, as well as clean the components inside from time to time.

Use appropiated protection to carry the computer, avoid crushings and try not to place objects such as the charger over or under it. 

It's recommended not to use your device when temperature is over 35 degrees.

ANOTATIONS

---

To turn on your computer, connect the power supply, then connect a monitor/television via HDMI and finally press the power button located on the side.

If your Linux distribution allows OEM installation (without creating a user), you will be asked to create a user, a password and then, to configure your network.
Otherwise, the user will have already been created by us, so, your username and password will be 'slimbook'. Feel free to customize it.

This device is composed of standard parts that can be upgraded or replaced:

• RAM Memories DDR4 SO-DIMM

• SSD M.2 SATA o NVME

• 2.5" HDD or SSD, via SATA3.

If you need to open your device without losing warranty  you just have to contact us, and we will reply as soon as possible.

To open the computer, remove the screws at the back, and help yourself with a elongated object to extract the top cover through the central hole in the back.

To access the BIOS/UEFI: Press the DEL key repeatedly after turning on the computer.
To access the "Boot menu": Press the F7 key repeatedly after turning on the computer.